Close up 9
FlexCom PNG5
FlexCom PNG6
FlexCom PNG8
FlexCom PNG7
Flex Com PNG1

The versatile jetvac combination unit

  • 2300psi @29gpm jetting capacity (other options available)
  • 1400 gpm suction capacity (other options available)
  • Pipe diameters up to 650mm
  • 3,500 or 3,750-litre water tank

The FlexCom is ideal for jetting and suction in built-up areas and locations that larger tankers would struggle to access. Mounted to either a 7.5, 10, or 12-tonne chassis, this jetvac combination unit uses PTO (Power Take-off) drive to deliver high-pressure jetting of 2300psi @29gpm and suction capabilities of 1400gpm. Operators can hydraulically adjust the configuration of the 3,500 or 3,750-litre water tank to the preferred position using a movable partition. The award-winning eControl+ and 7 or 9-Channel RioMote remote control are supplied as standard to safely operate the unit from a distance.

Square Flex Com 3

Flexible water tank capacity

The FlexCom has a water tank capacity of 3,500 or 3,750 litres depending on the chassis that the unit is mounted to. A sliding partition is available for larger 10 or 12-tonne models. Controlled by a hydraulic cylinder, this allows operators to change the capacities of the clean and waste water tanks to the preferred position on a job-by-job basis. A wastewater level indicator, comprising two long-sight glasses, is supplied as standard.

Square Flex Com 1

User-friendly

A range of user-friendly features allows the FlexCom to be easily operated at a distance from the jetting site. The suction reel is connected directly to the water tank for easy access, while the 2 ½” suction hose can be coiled and uncoiled safely using a hydraulic system controlled by the eControl+ and 7 or 9-Channel RioMote remote control handset. The pivoting hose reel features an optional RioSpindel hose guide and rotates through 180°, ensuring the best operating height at all times and providing better access to drains and sewers.

IC - FlexCom

Storage

Thanks to the FlexCom's perfect weight distribution, operators can carry more equipment without compromising on space. Large storage compartments and toolboxes on either side of the vehicle can house ancillary equipment including spray guns, CCTV equipment and other accessories.

Square Flex Com 2

Chassis

The FlexCom can be mounted on a 7.5t Mitsubishi Fuso Canter or a 10 or 12t Mercedes Benz, DAF or MAN chassis, depending on customer requirements. Able to access sites that larger units would struggle to reach, the FlexCom is suitable for operation in built-up locations including city streets and residential areas.

Square Flex Com 4

Jetting & Suction pumps

The FlexCom is equipped with a powerful, air-cooled, oil-lubricated Jurop PNR83 vacuum pump. This pump has a suction capacity of 8,200 lpm (492 m3 per hour). This pump makes it possible to cover lengths of 100 metres of hose.

Photo gallery

FlexCom Slider 1
FlexCom Slider 1
FlexCom Slider 1
FlexCom Slider 1
FlexCom Slider 1
/

Specification & Documentation

Default Specifications

Chassis

7.5, 10 or 12 tons
Dimensions (lxwxh)

6,580 x 2,080 x 2,500 mm
Empty weight

From 4,800 kg (depending on chassis)
Tank capacity

3,500 or 3,750 litres (depending on chassis)
Movable partition

Optional
Wastewater level indicator

2 long-sight glasses
Tank material

Steel
Tank opening

Fully opening rear door, manual or hydraulic
Connections

3” inlet, 4” outlet, 1” fixed hydrant connection
Motor/drive

PTO
HP pump Rioned/Speck
2200 psi / 22 gpm150 bar / 100 lpm
2300 psi / 29 gpm160 bar / 130 lpm

3000 psi / 16 gpm

200 bar / 72 lpm
3600 psi / 13 gpm250 bar / 60 lpm
Pump protection

Run-dry protection with overrun possibility
Vacuum pump

Jurop PNR83, air-cooled, oil-lubricated (capacity 8.200 lpm, 492m3/hour, 0.8 bar suction / 0.49 bar pressure)
HP hose reel

80 metres NW 13, hydraulically-driven, 180˚ swivelling
Suction reel

25 metres 2.5” or 3” suction hose, hydraulically-driven
Filling reel

35 metres NW 19 filling hose
Motor and pump housing

Fully enclosed housing
Control

Rioned eControl+
Remote control

RioMote 7 or 9-Channel remote control system
Storage

Toolboxes with hose storage boxes on top
Safety

Worklight and LED warning lights optionally available
Standard accessories

Nozzles, spray gun with lance, suction hose

Optional specifications

RioPulse pulsator system Pump adjustment to send the water through the hose in pulses
RioMeter hose counter RioMeter hose counter for display of meters of hose in the pipe
Anti-freeze system 30-litre anti-freeze tank with circulation capability to protect the high-pressure pump
RioSpindel RioSpindel automatic hose guidance on HP hose reel
Remote-controlled pneumatic valve Airless valve to control the supply to the vacuum tank

Product documentation

Download catalogue FlexCom EN 2024 (PDF, 879.921 KB)

Case Studies

IMG 2241

Super complete FlexComs for JKL

  • Products
Jet vac tanker header

What is a Jet Vac Tanker?

  • Guides

Related Products

Header Flex Com